As the only medium for the vehicle to contact the ground, the performance status of automobile tires is directly related to driving safety, driving experience and the service life of the vehicle.
Selection principles of automobile tires
Passenger cars usually choose tire that focus on comfort, quietness, and fuel economy. SUVs and off-road vehicles tend to choose tires with strong grip and good wear resistance.
Additionally, vehicles frequently traveling on harsh roads require tires with higher load-bearing capacity. Furthermore, cut-resistant tires are recommended for such driving conditions.
The specifications and size of the tires must be consistent with the original tires of the vehicle. When replacing tires, it’s crucial to carefully check the tire width, aspect ratio, and inner diameter. Inconsistent specifications can affect the vehicle’s handling and stability, so attention to detail is important.
The tread design of a tire directly affects its drainage, grip and noise reduction performance. When driving on a wet road, a tire with good drainage can effectively prevent slipping; on a dry road, a tire with strong grip can provide better handling.
How to maintain car tires
Check tire pressure regularly. Too high or too low air pressure will cause increased tire wear and even cause safety hazards such as tire blowouts.
Rotate tires regularly. Due to the different loads and steering angles on the front and rear axles of the vehicle, the wear of the tire will also be different. By regularly rotating the tires, you can balance the wear of each tire and extend its service life.
Regularly clean the oil, dirt and other impurities on the tire surface, and use special tire care agents for maintenance. In addition, avoid parking the vehicle in the sun or high temperature environment for a long time to reduce the aging speed of the tire.
Check the wear of the tires regularly, especially the tread depth. When the tread depth is below the legal minimum, replace the tires immediately.
Common Misunderstandings and Corrections
Myth 1: The wider the tire, the better. In fact, the width of the tire should match the vehicle’s weight, power performance and driving conditions. Although tires that are too wide can provide better grip and handling, they will also increase the vehicle’s rolling resistance and fuel consumption.
Myth 2: Blindly pursuing low-profile tires. Although low-profile tires can improve the vehicle’s handling and stability, they can also reduce the vehicle’s comfort and passability. Therefore, when choosing tires, you should weigh the actual needs of the vehicle and the road conditions.
Myth 3: Ignoring tire aging. During use, tires will be corroded by sunlight, rain, oil and other factors, which will accelerate the aging process. Even if the tires have not reached the legal replacement standards, they should be replaced in time according to their aging degree to avoid safety hazards.
The selection and maintenance of automobile tires is a key link to ensure driving safety and comfort. Car owners should choose tires reasonably according to vehicle type, purpose and personal needs, and follow scientific maintenance methods to extend their service life. At the same time, avoid common misunderstandings to ensure driving safety. I hope that car owners can pay more attention to the selection and maintenance of tires to provide solid protection for every trip.
